NEWS

Industry News

Company News

Precautions for using putty sprayer

Release time:

2020-02-25 16:21

Source:

The rapid development of the construction industry and the use of coatings have further accelerated the development of my country's spraying machine industry. At present, putty spray machines are very common in the spraying process. It not only greatly improves the construction efficiency but also saves time and cost. It can be used in building decoration, workpiece operations, or artistic creation. it. As products are used more and more widely, learning to use your own equipment safely has become a skill requirement that every engineering boss must master!

1. The status of the machine. A good start is half the success. Before formal operation, make sure the machine is in a good condition, make sure the equipment is installed correctly, the wires are connected correctly, the high-pressure pipes are clean and smooth, and the connections are not loose. If it is the first time for workers to use the putty spray machine , follow the installation instructions and videos provided by the manufacturer to operate and assemble it. If you have any questions, contact the manufacturer in time. Before formal use, do not spray directly. You can first test the pressure of the machine with clean water, etc. Are all aspects normal?

2. Confirm the usage conditions and usage capabilities. Different types have different requirements for materials. Not one piece of equipment is suitable for all coatings or operations. You must choose the appropriate machine for different spray materials, otherwise it is likely to cause machine failure or fail to achieve the construction effect. If it is a new putty spray machine , the putty should be thinner when you first use it. After spraying a few times, slowly make the material powder thicker so that the machine can adapt to the viscosity of the paint.

3. Construction preparation. If you want to achieve higher quality results, before using the product to spray, pre-construction preparations must be in place, such as wall leveling and the viscosity of the material. This is also top priority.

4. Operation steps. Before using putty spray equipment, you must understand the power support of the machine. The machine is gasoline-powered. Use gasoline as required. Do not use diesel instead. Make sure that each step is strictly carried out according to the instructions. Pay attention to safety and comply with everything. Operation precautions: after the operation is completed, the equipment must be disassembled and cleaned according to the regulations and procedures.

How to use the waterproof coating sprayer and principle

From the practical point of view, to analyze the actual use of putty sprayer effect

Warmly congratulate Cheng Yip Company to participate in the 23rd Brazil Building Materials Exhibition with complete success! Thank you for your continuous support and attention to us, sincerely look forward to cooperating with you, hand in hand to create a better tomorrow!

Warmly congratulate Cheng Ye Company to participate in the 19th Northeast China International Hardware & Tools Exhibition with complete success!

After 18 years of history, the scale of the expanding brand-name exhibitions in order to adapt to the market demand and the characteristics of the Shenyang region, the Northeast International Hardware & Tools Show has been held continuously in Shenyang since 1998.

Jiangsu Chengye Tools Co., Ltd. congratulates the 17th China Qidong-Tianfen Spring Science and Technology Hardware Fair was grandly held.

The 17th China Qidong-Tianfen Spring Science and Technology Hardware Fair will be held from February 12 to 14, 2016 at the exhibition center of Qidong Tianfen International Power Tools Trade City. As a key support exhibition of China Electrical Appliance Industry Association Power Tools Branch and Jiangsu Qidong Municipal People's Government, Tianfen Hardware Fair has become one of the most effective exhibitions in the hardware industry, especially in the power tools industry, which is deeply concerned and praised by the hardware industry attention and praise.

Jiangsu Chengye Tools Co., Ltd. participates in the 118th Canton Fair Exhibition

As an important window for China's opening up to the outside world and an important platform for the development of foreign trade, the Canton Fair has been held for 118 sessions. Among the exhibitors at this year's Canton Fair, there are 353 enterprises from 28 countries and regions along the "Belt and Road".

Jiangsu Chengye Tools Co., Ltd. participated in the 2015 Russia International Building Materials Exhibition

Moscow International Building Materials Exhibition in Russia is an international event organized by the famous British International Trade and Exhibitions Ltd (ITE) and jointly organized by the Federation Council, regional development departments, the Duma Government, the Moscow Government, the Russian Federation of Designers, the Russian Federation of Architecture, the Russian Architectural Association, the Russian Society of Architecture and Engineering and the Russian Design Association.

Senior Representatives of Jiangsu Chengye Tools Co., Ltd. attended the 29th Shanghai International Hardware Fair

The 29th China International Hardware Fair is scheduled to be held on March 30-April 1, 2016 at the National Convention and Exhibition Center (Shanghai Hongqiao New Complex).

View mobile version

JIANGSU CHENGYEI TOOLS CO., LTD

Address: East of Maojiagang Border Police Station, Lvsi Town, Qidong City, Jiangsu Province
Telephone: 86-513-68039888
Mobile: 86-18806285688

Mailbox: phil@chnye.cn